You are here: Home » News » Industry News » ​How to choose the right all-in-one heat pump?

​How to choose the right all-in-one heat pump?

Views: 0     Author: Site Editor     Publish Time: 2021-10-27      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

With the development of people's economy, people's requirements for the quality of life are getting higher and higher. People's requirements for showering and bathing are also getting higher and higher. Coldwater in European and American countries is only used for drinking, toilet flushing, and car washing, and hot water is used in other areas. The all-in-one air source heat pump, as its name implies, is a water heater that can provide the whole family with different hot water needs with large water volume, high water pressure, and constant temperature 24 hours a day, while consuming the least energy to complete the above requirements. Do you know how to choose the right all-in-one heat pump?


Here is the content list:

What is the working principle of an all-in-one air source heat pump?

What are the characteristics of the all-in-one heat pump?

How to install an all-in-one heat pump?


What is the working principle of an all-in-one air source heat pump?

The all-in-one air source heat pump compressor compresses the returning low-pressure refrigerant and turns it into high-temperature and high-pressure gas and discharges it. The high-temperature and high-pressure refrigerant gas flow through the copper pipe wound outside the water tank. The heat is transferred to the water tank through the copper pipe, and the cooled refrigerant becomes liquid under the continuous action of pressure. Because the pressure of the evaporator drops suddenly, the liquid refrigerant quickly evaporates and becomes It is gaseous and absorbs a lot of heat. At the same time, under the action of the fan, a large amount of air flows through the outer surface of the evaporator, and the energy in the air is absorbed by the evaporator. The temperature of the airdrops rapidly and becomes cold air and is discharged into the kitchen. Then the refrigerant that has absorbed a certain amount of energy flows back to the compressor and enters the next cycle.

all-in-one heat pump

What are the characteristics of the all-in-one heat pump?

1.Safety

Because air source heat pump is not directly heated by electric heating elements, compared with electric water heaters, it eliminates the potential safety hazards of electric leakage; compared with gas water heaters, there are no safety hazards such as gas leakage or carbon monoxide poisoning, so all-in-one air source heat pump has more excellent safety performance.

2.Comfortable

The all-in-one air source heat pump is a heat storage type. The heating function is automatically activated according to the temperature in the water tank to ensure a sufficient supply of hot water for 24 hours. Therefore, there will be no problem that the gas water heater cannot meet the hot water of multiple faucets at the same time. The electric water heater has a small capacity and many people need to wait for a bath. The hot water is ready to use, with large water output and stable water temperature, which can meet all your expectations for hot water.

3.save money

Since its power consumption is only a quarter of that of an equivalent electric water heater, it is equivalent to using the same amount of hot water. Using an all-in-one air source heat pump, the electricity cost is only a quarter of the electric heating. Calculated by a family of 4, the normal hot water consumption is about 200L/day, and the electric water heater is used for heating.


How to install an all-in-one heat pump?

The all-in-one air source heat pump is usually installed on the balcony of the kitchen, and the air outlet is connected to the kitchen through the air duct, so that the cold air is blown out can directly enter the kitchen to achieve a cooling effect. When installing the all-in-one air source heat pump, you only need to connect the hot and cold water outlets with the hot and cold water reserved in the house, and then you can use them. The installation is very simple.


It is the responsibility of each manufacturer to produce an all-in-one air source heat pump that meets the standards, so as to ensure the safety of the electricity supply. MICOE conducts many tests on durable all-in-one air source heat pumps before they leave the factory, and the quality qualification rate is guaranteed. If you are in the all-in-one air source heat pumps business, you can consider our cost-effective products.


QUICK LINKS

PRODUCT CATEGORY

CONTACT US
   No,199,South Yingzhou Road ,222002 Lianyungang ,China
    +86-518-80272009
       +86-518-80272010    
SOCIAL NETWORKS
 Copyright   2020 Jiangsu micoe solar energy co.,ltd    Technical support: leadong     Sitemap