eco 18kw hot water heat pump for residential- China Suppliers Manufacturers Factory

On September 11^th,The Chairman of the China Entrepreneurs Club, the former China Merchants Bank President Mr Ma led by the 30 well-known Chinese entrepreneurs, executives of the Chinese Green Company Alliance Delegation, launched an eight-day visit to the “Country of Innovation” in Sweden.

The CEO of MICOE and other business executives were invited to participate in the Swedish Prime Minister’s Roundtable Business Conference,and met with Swedish Prime Minister Stefan Levine, Chinese Ambassador to Sweden Mr Chen , Swedish Minister of Enterprise and Innovation Michael Dumberg, Swedish Trade and Investment Commission Chief Executive Officer and President Eva Berg, and with Sweden Well-known political and business leaders to carry out extensive exchanges.

                         

 

 Swedish Prime Minister Stefan Levin (left) and President of MICOE (right)

On July 23, 2020, with the joint efforts of China's space science and technology personnel and the keen attention of the people of the whole country, along with the roar, the "tianwen-1" successfully launched and started China's first Mars exploration trip.

As a strategic partner of China's aerospace industry, MICOE, together with the "fire detection witness", came to Wenchang space launch site in Hainan Province. He has experienced the shocking scene of the launch of tianqian-1, and witnessed another historical moment of China's aerospace industry.

The application of an all-in-one heat pump is the best solution for a centralized hot water supply system for large, medium, and small hot water in school dormitory, hotel, bath center, and other places. The use of an all-in-one heat pump is very wide, similar to an air source heat pump, which operation principle is a little different. The main object is some places where the group lives, so the quality of all-in-one heat pumps is very important. Then, let’s introduce some details about all-in-one heat pumps.

Here is the content list:

What are the different types of all-in-one heat pumps in the market?

What is the operation principle of an all-in-one heat pump?

What are the advantages of an all-in-one heat pump?

What are the different types of All-in-one heat pumps?

There are many kinds of all-in-one heat pump water heaters on the market, including three series of a solar energy booster, water source, and air source. A solar-powered heat pump is a kind of heat pump technology that combines heat pump and solar energy technology. Water source heat pump is the use of a certain temperature of water (above 20℃) as a heat source with refrigerant as the medium, the heat in the water source after absorption by the compressor compression heating, heat exchange through the heat exchanger and cold water to achieve the purpose of heating and making hot water. The water source heat pump must have a certain temperature and flow of the source. Air source heat pumps heat water by obtaining heat from the air in a similar way to water source heat pumps. Among the three heat pumps, the air source heat pump is subject to the least condition limitation and the largest development space.

What is the operation principle of an all-in-one heat pump?

All in one heat pump is the use of the inverse Carnot principle, through the medium, the heat from the low-temperature objects to high-temperature water equipment. Heat pump device, can make the medium (refrigerant) phase change, become lower than the low-temperature heat source, to spontaneously absorb the heat of the low-temperature heat source; Back to the compressor after the medium, and is compressed into high temperature (higher than high-temperature water) high-pressure gas, so that the spontaneous release of heat to high- temperature heat source; Realize from the low-temperature heat source "transport" heat to high-temperature heat source.

What are the advantages of an all-in-one heat pump?

The first and the very important one is safety. The all-in-one heat pump’s air tank is made of SU/B304 food-grade stainless steel. In the process of water heating, there is a complete separation of water and electricity. And secondly, is it environmentally friendly? Yes, for sure. All in one heat pumps can save solar energy effect is good, save electricity. Its power consumption is the same capacity as electric water heater 1/4, gas water heater 1/3. The third one is good for the customer, easy to install: The all-in-one heat pump is a clever combination of the heating host and the air energy storage tank in the installation is simple, convenient, and does not need professional personnel. Furthermore, all in one heat pump in terms of appearance, it can be customized according to the user's preferences, such as cylindrical, cabinet, bedroom cabinet, wall hanging, since you can put it a suitable place in your home, as long as it can fit in.

Compared with the traditional water heater, this all-in-one heat pump will be more environmentally friendly, more in line with the living standards of modern people, and better meet the needs of people. If you are in an all-in-one heat pump business, you can consider our cost-effective products.

The heat pump hot water system inputs a small amount of high-grade energy (such as electric energy) to realize the transfer of heat energy from low temperature to high temperature. Throughout the year, the heat pump hot water system continuously removes the heat from the air, groundwater, and surface water, and heats the tap water to a certain temperature, and supplies it to users as domestic hot water.

Here is the content list:

How to choose the installation location of a hot water heat pump?

What are the design requirements of the hot water heat pump system?

How to maintain the hot water heat pump?

How to choose the installation location of a hot water heat pump?

1. The installation location of heat pump hot water must have enough space.

2. The installation location of heat pump hot water should be as far away as possible from living and working areas.

3. When the unit of heat pump hot water is installed outdoors, wind and rain prevention facilities must be prepared.

4. Pay attention to the wind direction when installing the unit.

5. The installation position of the unit should be convenient for drainage.

What are the design requirements of the hot water heat pump system?

1. The installation of the heat pump hot water should be leveled and fixed on the high-rise or ground foundation of the building. The foundation load should meet the requirements, and the foundation height should not be less than 100mm.

2. The unit of heat pump hot water is fixed with anchor bolts, and vibration reduction measures must be taken during installation.

3. The piping material of the water system on the user side can be selected: galvanized welded steel pipe, seamless pipe, copper pipe, stainless steel pipe, aluminum-plastic pipe, PP-R pipe.

4. In order to prevent the spread of vibration, the water pipe connecting the unit should be equipped with a rubber soft joint, and a soft wire protection tube should be used.

5. The water system pipeline should use high-quality insulation materials, and the insulation thickness depends on the local environment and the insulation performance of the insulation materials.

6. The installation of equipment, pipelines, valves, and meters should comply with relevant installation specifications and be easy to overhaul; pipe supports should meet the requirements of corresponding material and model strength.

7. The domestic water used on the user side of the heat pump hot water unit must comply with the "Sanitary Standards for Drinking Water", and it is strictly forbidden to directly use untreated water sources such as groundwater, river water, and lake water; water sources that do not meet the requirements must be installed with water treatment facilities.

8. In order to prevent impurities from entering the unit and causing a blockage, the water inlet pipe of the unit must be installed with a filter to facilitate cleaning.

How to maintain the hot water heat pump?

1. Make frequent patrols and regularly check the water system pipelines and valves for water leakage; Check whether the water system instruments are in good condition and work properly; Check whether the heat pump hot water are falling off or loose.

2. Always check and clean the air system blockage caused by the accumulation of dust, leaves, or other dirt on the fins. The fins are cleaned according to the situation. The cleaning method is: gently wipe with a rag or soft brush, and wash with clean water.

3. The maintenance of the electrical system should be carried out by a professional electrician. Check whether the electrical box of the electrical box is normal, whether the wiring is firm and reliable, and ensure that there is no looseness; regularly clean the dust in the electrical box. If the machine is running, if there is a failure, it must be shut down for inspection and continue to work after the failure is eliminated.

It is the responsibility of each manufacturer to produce an industrial hot water heat pump that meets the standards, so as to ensure the safety of the use of hot water heat pump and the healthy development of the heat pump hot water market. MICOE many tests on hot water heat pumps before they leave the factory, and the quality qualification rate is guaranteed. If you are in the heat pump business, you can consider our cost-effective products.

Simply the Most Economical Way to Heat Pools and Spas. The industry’s first heat pump charged with non-ozone depleting refrigerant, R410A. 100% titanium heat exchanger assures corrosion-free performance for extra long life

What is Monoblock Pump? A Monoblock pump is a single segment mechanical machine with a horizontal and end suction pump which has a partially closed or open runner. In this pump, all the rotating components are mounted on a single shaft. The name “mono” means a single unit, and the “monoblock pump” means a pump device that strongly couples with a prime mover, such …

While a refrigerator pulls heat from inside a box and sends it into the surrounding room, a stand-alone air-source heat pump water heater pulls heat from the surrounding air and transfers it -- at a higher temperature -- to heat water in a storage tank. You can purchase a stand-alone heat pump water heating system as an integrated unit with a ...

2.0kW / 2.7kW 2.5kW / 3.2kW 3.5kW / 4.3kW 4.2kW / 5.1kW 5.0kW / 6.0kW 6.0kW / 7.2kW 7.1kW / 8.0kW 8.0kW / 9.0kW: FEATURES: ECONAVI Intelligent Eco Sensors, Nanoe-G Air Purifying System ... What to Consider Before Getting a Heat Pump. Before you purchase a heat pump, there are some things you need to take note of to ensure you’re purchasing ...