air source R410a hot water heat pump for residential- China Factory Manufacturers Suppliers

The all in one heat pump can efficiently produce domestic hot water while releasing cold air like an air conditioner to meet the cooling needs of the kitchen. And the all in one heat pump can also achieve dehumidification in local spaces such as balconies, storage rooms, garages, etc., to prevent items from becoming moldy.

Here is the content list:

1. What is the background of the development of all in one air source heat pumps?

2. What kind of development process has the air source heat pump gone through?

3. What are the advantages of the all-in-one heat pump?

 

What is the background of the development of all in one air source heat pumps?

With the development of people's economy, people's requirements for the quality of life are getting higher and higher. People's requirements for showering and bathing are also getting higher and higher. Gas water heaters, electric water heaters, and solar water heaters are far from meeting people's needs for comfort, energy-saving, and safety. In developed countries in Europe and the United States, the ratio of cold and hot water is 1:9 (9:1 in China). Coldwater in European and American countries is only used for drinking, toilet flushing, and car washing, and hot water is used in other areas. The market share of household central water heaters in European and American countries is over 90% (less than 3% in China).

What kind of development process has the air source heat pump gone through?

(1) The first generation: high-power gas

The outlet water temperature and water pressure are greatly affected by climatic conditions, and the water temperature is unstable and difficult to adjust.

(2) The second generation: high-power electric water heater

The main reason is that the energy consumption is very high, it is easy to leak electricity and hurt people, and the water storage capacity is insufficient.

(3) The third generation: solar water heater

In theory, it is the most energy-saving, but considering the actual situation, the actual environment will often rain and cloudy and the winter in the north requires external electric assistance, which is quite a hidden danger to the safety of an electric water heater.

(4) The fourth generation: all in one heat pump

In response to the problems of previous products, people made unremitting efforts to develop an all in one air source heat pump in 2005.

What are the advantages of the all in one heat pump?

(1) Kitchen refrigeration

This is the biggest advantage of the all in one heat pump. Ordinary water heaters (such as electric heating, gas water heaters, solar water heaters, etc.) can never have the function of cooling. If the kitchen needs additional cooling function, you need to buy a kitchen air conditioner. Because the kitchen has oily fume, it is a special environment, so the kitchen air conditioner is different from the ordinary air conditioner, and the price is much more expensive (generally the price is more than 4000 yuan).

(2) Green

Gas water heaters heat hot water by burning combustible gas, which will emit a large amount of carbon dioxide, sulfur dioxide, and other harmful exhaust gas. The all in one heat pump just transfers the heat from the surrounding air to the water, completely achieving zero emissions, and has almost no impact on the environment. Therefore, the all in one heat pump is a real environmentally friendly water heater.

(3) Low-carbon fashion

Today, energy conservation and emission reduction have become the trend of the times, saving energy and reducing carbon emissions is the most fashionable way of life. As mentioned earlier, the all in one heat pump adopts the reversed Carnot principle, which transfers the energy in the air to the water instead of directly heating with electric heating elements. Therefore, the energy efficiency of the all in one heat pump can reach 4 times that of the electric water heater, that is, heating. The same amount of hot water consumes a quarter of the electricity of an electric water heater, which greatly saves electricity consumption.

The above is all about the all in one heat pump. If you want to obtain multiple effects with one air source heat pump, you may wish to install an all in one heat pump at home. You can consider using MICOE 's cost-effective products.

Visit www.micoe.com to get more information.

The heat pump hot water system inputs a small amount of high-grade energy (such as electric energy) to realize the transfer of heat energy from low temperature to high temperature. Throughout the year, the heat pump hot water system continuously removes the heat from the air, groundwater, and surface water, and heats the tap water to a certain temperature, and supplies it to users as domestic hot water.

Here is the content list:

How to choose the installation location of a hot water heat pump?

What are the design requirements of the hot water heat pump system?

How to maintain the hot water heat pump?

How to choose the installation location of a hot water heat pump?

1. The installation location of heat pump hot water must have enough space.

2. The installation location of heat pump hot water should be as far away as possible from living and working areas.

3. When the unit of heat pump hot water is installed outdoors, wind and rain prevention facilities must be prepared.

4. Pay attention to the wind direction when installing the unit.

5. The installation position of the unit should be convenient for drainage.

What are the design requirements of the hot water heat pump system?

1. The installation of the heat pump hot water should be leveled and fixed on the high-rise or ground foundation of the building. The foundation load should meet the requirements, and the foundation height should not be less than 100mm.

2. The unit of heat pump hot water is fixed with anchor bolts, and vibration reduction measures must be taken during installation.

3. The piping material of the water system on the user side can be selected: galvanized welded steel pipe, seamless pipe, copper pipe, stainless steel pipe, aluminum-plastic pipe, PP-R pipe.

4. In order to prevent the spread of vibration, the water pipe connecting the unit should be equipped with a rubber soft joint, and a soft wire protection tube should be used.

5. The water system pipeline should use high-quality insulation materials, and the insulation thickness depends on the local environment and the insulation performance of the insulation materials.

6. The installation of equipment, pipelines, valves, and meters should comply with relevant installation specifications and be easy to overhaul; pipe supports should meet the requirements of corresponding material and model strength.

7. The domestic water used on the user side of the heat pump hot water unit must comply with the "Sanitary Standards for Drinking Water", and it is strictly forbidden to directly use untreated water sources such as groundwater, river water, and lake water; water sources that do not meet the requirements must be installed with water treatment facilities.

8. In order to prevent impurities from entering the unit and causing a blockage, the water inlet pipe of the unit must be installed with a filter to facilitate cleaning.

How to maintain the hot water heat pump?

1. Make frequent patrols and regularly check the water system pipelines and valves for water leakage; Check whether the water system instruments are in good condition and work properly; Check whether the heat pump hot water are falling off or loose.

2. Always check and clean the air system blockage caused by the accumulation of dust, leaves, or other dirt on the fins. The fins are cleaned according to the situation. The cleaning method is: gently wipe with a rag or soft brush, and wash with clean water.

3. The maintenance of the electrical system should be carried out by a professional electrician. Check whether the electrical box of the electrical box is normal, whether the wiring is firm and reliable, and ensure that there is no looseness; regularly clean the dust in the electrical box. If the machine is running, if there is a failure, it must be shut down for inspection and continue to work after the failure is eliminated.

It is the responsibility of each manufacturer to produce an industrial hot water heat pump that meets the standards, so as to ensure the safety of the use of hot water heat pump and the healthy development of the heat pump hot water market. MICOE many tests on hot water heat pumps before they leave the factory, and the quality qualification rate is guaranteed. If you are in the heat pump business, you can consider our cost-effective products.

Eco Inverter 5kw Swimming Pool Heat Pump, find complete details about Eco Inverter 5kw Swimming Pool Heat Pump, Eco Swimming Pool Heat Pump, Inverter Swimming Pool Heat …

As the scepticism about fossil fuels grows, domestic and commercial space heating systems have had to adapt. Heat pumps from EvoHeat offer pioneering technology to ensure superior energy-efficiency and affordability. EvoHeat only use zero-depletion refrigerants, that are classified by international standards as being environmentally-sound.

The COP value (cooling efficiency) is actually the ratio of the cooling capacity (heating capacity) to the input power that the heat pump system can achieve. Under the same working conditions, the larger the ratio, the higher the efficiency of the heat pump system, the more energy-saving it is; Before comparing the COP value of the ...

And it can shorten the time of heating comparing with normal heat pump and R410A inverter heat pump. Low noise level R32 17.5kw inverter air source heat pump pool heater is using low noise level fan and also the inverter compressor will start and stop in a rather soft and silent way. The noise level of our inverter heat pump can reduce to below ...