











With the country's policy guidelines and the enhancement of people's awareness of environmental protection, clean energy heating is being praised by more and more people. Due to the vigorous promotion of coal-to-electricity conversion, the air source heat pumps have become the darling of the heating industry. What exactly is an air source heat pump? Why will air source heat pumps become the first choice for winter heating in the future? The following will solve these confusions for you.
Here is the content list:
What is an air source heat pump?
What are the advantages of the air source heat pump?
What prompted the rise of air source heat pumps?
The air source heat pump is also called air source heat pump water heater. As the name suggests, it is to transport the heat in the air to the water through the refrigerant. The traditional electric water heater and gas water heater obtain heat by consuming gas and electric energy, while the air energy water heater achieves the purpose of heating water by absorbing the heat in the air, In the case consuming the same electric energy, it can absorb about three times the electric energy to heat water.
(1) The air source heat pump system integrates cold and heat sources, so there is no need to set up a special refrigerating machine room and boiler room. The air source heat pump unit can be placed on the roof or the ground arbitrarily, does not occupy the effective use area of the building, and the construction and installation of air source heat pump are very simple.
(2) The air source heat pump system has no cooling water system, no cooling water consumption, and no cooling water system power consumption. In addition, many cases of Legionella infection caused by cooling water pollution have been reported. From the perspective of safety and health, the air source heat pump also has obvious advantages.
(3) The air source heat pump system does not require boilers, boiler fuel supply systems, dust removal systems, and flue gas discharge systems. The air source heat pump system is safe and reliable and does not pollute the environment.
(4) The air source heat pump chiller (heat) water unit adopts a modular design, so there is no need to set up a spare unit. During the operation of the air source heat pump, the computer automatically controls to adjust the operating status of the unit to adapt the output power to the working environment.
(1) The heating market has changed, and the market demand for energy-saving and environmentally friendly products is huge.
Market demand is the main factor for the rapid development of the air source heat pump industry. As the country vigorously promotes the coal-to-electricity policy, the heating industry is facing major changes, and there is an urgent need for a clean and renewable energy source to
replace the original coal-fired heating. Air source heat pumps have developed rapidly under such market demand.
(2) Changes in the energy structure, the state strongly supports clean energy.
In terms of energy structure, the country has vigorously promoted renewable clean energy in recent years to ease energy pressure. The air source heat pump can use the heat stored in the air for cooling and heating, which provides a new opportunity for the development of the renewable energy industry.
(3) Energy saving and environmental protection, zero pollution, high energy efficiency ratio.
The rapid development of air source heat pumps is also closely related to its nature. The air source heat pump does not produce any air pollutants when it is used, and mainly uses the internally circulating refrigerant to absorb heat from the air, and the entire operation process achieves zero pollution in a true sense. Air source heat pump operation does not require any electric auxiliary heating, and the loss of unit operation is very small, which is a real energy-saving product. In most areas in China, the average temperature is above 10 degrees, and the air source heat pump unit consumes 1 kilowatt-hour of electricity and can produce more than 3 kilowatts of heat. The energy efficiency ratio is outstanding.
Although the air source heat pumps have many advantages, everything has two aspects, and air source heat pumps also have their disadvantages. However, it seems that the air source heat pump is the best, and MICOE's air source heat pump products are worth your choice.
The air source heat pump is an energy-saving device that uses high-level energy to make heat flow from low-level heat source air to a high-level heat source. It is a form of a heat pump. As the name implies, heat pumps are like pumps, which can convert low-level heat energy that cannot be directly used (such as the heat contained in the air, soil, and water) into high-level heat energy that can be used, thereby saving part of high-level energy (such as coal, gas, oil, electrical energy, etc.). Below, I will introduce you to one of the air source heat pumps — monoblock heat pump.
Here is the content list:
1.What is the working principle of the monoblock heat pump?
2.What are the advantages of the monoblock heat pump?
3.How to use a monoblock heat pump?
The monoblock heat pump draws heat from the surrounding environment. The working principle of the monoblock heat pump is the same as that of the refrigerator, and they all work according to the reversed Carnot cycle. The only difference between the two is that the operating temperature range is different. A compression type monoblock heat pump device is mainly composed of four parts: evaporator, compressor, condenser, and expansion valve. By allowing the working fluid to continuously complete the thermal cycle of evaporation (absorb heat from the environment) → compression → condensation (release heat) → throttling → re-evaporation, the heat in the environment is transferred to the water.
(1) Safety
Since the monoblock heat pump is not directly heated by electric heating elements, compared with electric water heaters, the safety hazard of leakage is eliminated. Compared with gas water heaters, the monoblock heat pump has no safety hazards such as gas leakage or carbon monoxide poisoning, so monoblock heat pump has more excellent safety performance.
(2) Comfortable
The monoblock heat pump is a heat storage type, and the heating function is automatically activated according to the temperature in the water tank to ensure a sufficient supply of hot water for 24 hours. Therefore, the monoblock heat pump will not have the problem of being unable to meet the hot water for multiple faucets at the same time like the gas water heater, nor will the electric water heater have the problem of small capacity and waiting for multiple people to take a bath. The monoblock heat pump can use hot water immediately when it is turned on, with large water output and stable water temperature, which can meet all your expectations for hot water.
(3) Save money
Because the monoblock heat pump consumes only one-fourth of the equivalent electric water heater. That is equivalent to using the same amount of hot water, using the monoblock heat pump, and electricity costs only one-fourth of the electric heating.
The monoblock heat pump is usually installed on the kitchen balcony. When installing the monoblock heat pump, you only need to connect the hot and cold water outlets with the hot and cold water reserved in the house. The monoblock heat pump mostly use microcomputer intelligent controllers, which have time setting, timing switch function, water temperature setting, ventilation setting, overheating protection, and other intelligent control functions. However, most of the functions of the monoblock heat pump have been set by the manufacturer at the factory. Just use the default value. You only need to set the temperature you need (usually set at 45-50 degrees) You can use it.
The above is all about the monoblock heat pump. If you want to obtain multiple effects with one air source heat pump, you may wish to install a monoblock heat pump at home. You can consider using MICOE's cost-effective products.
On December 29th, the 20th anniversary celebration of Micoe with the theme of ‘Creating Better Things’ was held online. The Conference is planning the blueprint for the future development of Micoe.
This is a conference to review, give thanks and look forward to the future. Xu Xinjiang, chairman of MICOE CORPORATION, summed up and reviewed the development of Micoe in the past 20 years with six themes: stepping on the tide of The Times, taking the road of brand, doing innovation, gathering the momentum of cooperation, gathering the strength of struggle and capturing the title of champion.
The chairman said that in the uncalm year of 2020, Micoe created extraordinary. In the past 20 years, Micoe have experienced challenges and growth together. In the new 20 years, the enterprise will still face the unknown and uncertain challenges , but as the leading enterprise, with clear goals and firm steps, Micoe will be able to carry on the past to the future, riding the waves.
Xu Xinjiang, chairman of MICOE CORPORATION
Through its products and services, the company will create a greener, more energy efficient, healthier, safer, more intelligent and more comfortable life experience for users. Through business and service, we can bring more diversified multi-layer choices, higher value creation, better service experience, stronger comprehensive competitiveness and more sustainable development to our partners.
Li Jun, CEO of MICOE CORPORATION
In recent years, Micoe around the one horizontal and one vertical strategic layout in the intelligent healthy kitchen and bathroom, clean energy heating and comfortable building system in three fields of depth extension, formed a rich and diversified product matrix.
The conference held a grand awarding ceremony, and announced the top 10 benchmark projects, top 10 innovative products, top 10 public welfare events, top 10 moving moments, top 10 news events, the most valuable innovation award of the past 20 years, the brand contribution award of the past 20 years, the most beautiful pioneer and many other awards. The atmosphere was warm and exciting.
Top 10 Benchmark Projects
Top 10 Innovative Products
Top 10 Public Welfare Events
Most Valuable Innovation Award
From the year 2000 at the turn of the century to the year 2020, Micoe has gone through 20 years of youth and ushered in the 20th anniversary of its creation. In the warm celebration ceremony and wonderful celebration performance, the 20th anniversary celebration of Micoe came to a close.
Micoe Lhasa Base Large Flat Plate Solar Collector Is in Place
On December 22, the completion and commissioning ceremony of Micoe large flat-plate solar collector project was successfully held in Lhasa Industrial Center.
At the meeting, Director of Lhasa Economic Development Zone Chen Zhihai delivered an important speech. Director Chen affirmed the contribution made by Micoe to The cleaning and heating of Tibet, and also spoke highly of the strategic cooperation between Micoe and Tibet Vocational and Technical College on the employment of graduates. Director Chen said, looking forward to the production of Micoe factory can promote the training of local talents in Tibet, the development of local economy and social progress play a positive role.
Micoe Lhasa base large flat plate solar collector project production ceremony
Xu Xinjian, chairman of Micoe delivered a keynote speech and announced the completion and production of Micoe flat plate solar collector factory. Chairman of the board pointed out that, for a long time, the Headquarters of the economic development area of Lhasa gave great support and help to the development of Micoe. In the future, we will further recruit local talents to promote local economic development and social progress. This is a powerful measure for us to give back to the society and the leaders of the Lhasa Economic development Area for their support.
The world's first large plate automatic production line product rolling off the line ceremony
Subsequently, under the joint witness of the leaders, guests and media, the world's first large automatic plate production line products officially rolled off the production line. The smooth holding of this ceremony marks the world's first large-scale automatic flat panel production line was officially put into operation, and also marks the official launch of another milestone project of the Micoe ‘Rooted in Tibet to serve Tibet for 50 years’.