5kw Outdoor Swimming Pool Heat Pump- Suppliers Manufacturers Factory From China

Air source heat pump water heater units and solar water heaters, as necessities of residents' lives, are both devices that use natural and environmentally friendly energy to generate hot water, but they have essential differences. The air source heat pump water heater unit uses air heat as its energy source, but the way it obtains energy is active, so it is not affected by cloudy, rainy, days and nights. The way solar water heaters obtain energy is passive. It relies on direct sunlight to have a better effect, so it can only produce hot water on sunny days.

Here is the content list:

What kind of device is an air source heat pump hot water (heater) unit?

What is the working principle of the air source heat pump hot water (heater) unit?

Air source heat pump hot water (heater) unit needs electricity, will the operating cost be high?

What kind of device is an air source heat pump hot water (heater) unit?

This equipment of air source heat pump water is high-tech energy-saving equipment for the production of hot water. It absorbs heat from the air to heat water to 65°C (low-end manufacturers heat it to 55°C). As central hot water equipment, drawing on the principle of an all-in-one heat pump, it is widely used in collective water supply units such as hotels, sauna centers, hospitals, factories, and residential communities, as well as small water supply units such as villas, residences and beauty salons.

What is the working principle of the air source heat pump hot water (heater) unit?

The air source heat pump hot water (heater) unit consists of a compressor-condenser-throttle-evaporator-compression mechanism into a circulating system. The heat medium (also called refrigerant) circulates in the system under the action of the heat pump. The air source heat pump completes the gaseous pressure increase and temperature rise process in the compressor (the temperature is as high as 80-100 ℃). After it enters the condenser, it releases high-temperature heat to heat the water, and at the same time, it is cooled and transformed into a liquid state. When it runs to the evaporator, The liquid quickly absorbs heat and evaporates and transforms into a gaseous state again, and at the same time the temperature drops to minus 20 ℃-30 ℃, then the air around the evaporator will continuously transfer low-temperature heat to the heat medium. The continuous circulation of the heat medium realizes the process of converting the low-temperature heat in the air into high-temperature heat and heating the cold water.

Air source heat pump hot water (heater) unit needs electricity, will the operating cost be high?

The air source heat pump water heater (heater) unit is different from an electric water heater (heater) unit. The electric water heater (heater) unit uses the electric heating tube to directly convert electrical energy into heat to heat cold water. The highest conversion efficiency of electricity to heat is about 95℅. However, the electric energy consumed by the air source heat pump water heater (heater) unit drives the air source heat pump to work and only plays a role in promoting the circulation of the heat medium. Because a large amount of heat in the air enters the system, the energy obtained by the hot water is much greater than that consumed by the heat pump. For electric energy, the ratio of these two energies can reach more than 3-4 times, that is, the conversion rate of electricity to heat is as high as 400℅. That is to say: the main energy for heating water in the air-source heat pump water heater (heater) unit system is the surrounding air, and enough electricity can be obtained by using 1/3 or 1/4 of the electricity consumed by the electric water heater (heater) unit. For hot water, the operating cost is obviously much lower than that of electric water heaters or electric boilers.

It is the responsibility of each manufacturer to produce an air source heat pump that meets the standards, so as to ensure the safety of the electricity supply. MICOE conducts many tests on durable air source heat pumps before they leave the factory, and the quality qualification rate is guaranteed. If you are in the air source heat pump business, you can consider our cost-effective products.

The hot water heat pump is one of the most widely used forms of heat pumps in my country. Water is used as a source of cold and heat for heating in winter and cooling in summer. Do you know what conditions hot water heat pumps should meet when they are used?

Here is the content list:

1. What is the working principle of a hot water heat pump?

2.What conditions should a hot water heat pump have in its application?

(1) Reliable water source

(2) Sufficient water

(3) Water temperature

What is the working principle of a hot water heat pump?

The working principle of the hot water heat pump heating in winter: the hot water heat pump takes the groundwater from the water extraction well and sends it to the hot water heat pump unit. The unit absorbs the low-grade groundwater of heat energy, and then it is sent back to the ground and the earth to heat again after being charged well. Exchange to increase heat energy, and then reuse.

The liquid refrigerant in the hot water heat pump unit absorbs the low-level heat energy of the groundwater in the evaporator and evaporates into a low-temperature and low-pressure gaseous refrigerant. The compressor (using a fully enclosed flexible scroll compressor with reliable operation and high heating efficiency) compresses it into a high temperature and high-pressure gaseous refrigerant, and then sends it out of the condenser. The high-temperature and high-pressure gaseous refrigerant in the condenser transfer heat to the building's circulating water (geothermal or heating radiator) through heat exchange. After dissipating the heat to the building, it condenses into a liquid state and then returns to the hot water heat pump evaporator to repeat.

What conditions should a hot water heat pump have in its application?

(1) Reliable water source

Just listen to the name of the hot water heat pump to know how important the water source is. A reliable water source is the first requirement in the application. The water source can be surface water, rivers, lakes, and groundwater. Groundwater is widely used. As groundwater is one of the country's important resources, the government has restrictions and regulations on the exploitation and use of it. Therefore, before installing a hot water heat pump, it must first be checked by relevant government departments.

(2) Sufficient water

The amount of water can be related to the cooling or heating efficiency of the hot water heat pump, so before determining the plan, the amount of water should be determined, and pumping experiments should be carried out when necessary to see if the groundwater level drop during the continuous pumping time meets the requirements.

(3) Water temperature

The temperature of the water source is also an important factor affecting the hot water heat pump. The same unit provides different cold and heat due to different water temperatures. Generally speaking, the range of hot water heat pump requirements for water source temperature is: under cooling conditions, the water temperature into the evaporator is 10-22°C; under heating conditions, the water temperature into the condenser is 18-40°C.

It is the responsibility of each manufacturer to produce hot water heat pumps that meet the standards, to ensure the healthy development of the hot water heat pumps market. MICOE conducts many tests on hot water heat pumps before they leave the factory, and the quality qualification rate is guaranteed. If you are in the hot water heat pumps business, you can consider our cost-effective products.

Since March, the epidemic situation in China has shown a trend of outbreak in multiple places. From March 1 to March 14 this year, there have been more than 10000 local outbreaks, involving 27 provinces.

The epidemic situation is an order, and prevention and control is a responsibility. Micoe immediately held an emergency online meeting, established a project team, determined the emergency plan and issued instructions to overcome all difficulties to meet the needs of front-line anti epidemic personnel under the condition of protecting their own anti epidemic safety.

According to the actual situation, Micoe quickly gave the solution of shower container + air energy hot water system. The shower container is a standard box type shelter with its own heat source and bath facilities, which are highly integrated. It can be installed in three steps and can be used with water and electricity.

Micoe shower container has three blocks: shower area, equipment area and rest area, which can provide 55 ℃ constant temperature hot water all day. It can quickly and comprehensively sterilize the whole box. In terms of water, it adopts overflow ultraviolet and high temperature double sterilization, and uses the energy of ultraviolet photons to destroy various viruses in the water body to ensure the safety of bathing hot water. The top ten security design of micoe shower container products, such as windproof, shockproof, anti-corrosion, fire prevention, anti slip, anti ponding, moisture-proof, heatstroke prevention and lightning prevention, is also the outstanding advantages of micoe shower container products. It not only provides warm and comfortable bathing experience for epidemic prevention personnel, but also provides comprehensive security guarantee.

In the face of the epidemic, micoe employees are not afraid of difficulties and rise to them. Micoe technical installation and construction team overcame many difficulties, responded quickly and carried out careful construction. Three sets of shower containers combined with air energy hot water system were quickly delivered to the two stations. It took less than 4 hours to complete the installation of the main equipment.

At present, the equipment has passed the acceptance and started to be used. The resident person in charge Yang Jian said: "micoe has responded quickly, the service is in place and the technology is mature. It has effectively solved the practical problems for the epidemic prevention personnel and praised your professionalism and sense of responsibility!"

Micoe always adheres to the original intention of service, shoulders social responsibility, actively responds to the call of the state and the government, rushes ahead, goes all out, appears where the people need, interprets the enterprise spirit with actions, and plays the role of guarding the lights of thousands of homes. In the face of such a situation, micoe will always maintain combat readiness and do its best to assist in the battle of epidemic prevention and control!

These systems are based around our industry leading Arctic EVI series heat pumps. In some North American states and provinces that have high demand for our products, the sale and project organization of your purchase will be handled …

Eco Inverter 5kw Swimming Pool Heat Pump, find complete details about Eco Inverter 5kw Swimming Pool Heat Pump, Eco Swimming Pool Heat Pump, Inverter Swimming Pool Heat Pump, Eco Heat Pump for Swimming Pool - MICOE

Hydraulic Supply is a full service distributor of fluid power products and services. We carry a selection of over 20,000 hydraulic, pneumatic and industrial products in stock from the most recognized brands in the industry.

The Bosch Inverter Ducted Packaged Unit is one of the quietest air-to-air systems on the market. Through the use of silent blade technology, sound isolating mounts and outdoor condensing section placement - the system can deliver outdoor sound levels as low as 59 dBA - which is far superior to most standard units on the market.