Filter Configuration：
First Level: polypropylene melt-blown filter element
Second Level: granular activated carbon filter element
Third Level: polypropylene melt-blown filter element
Fourth Level: ultrafiltration membrane filter element
Fifth Level: post-mounted activated carbon filter element
Product Parameters：
Inlet water quality: municipal tap water
Water inlet pressure: 0.10Mpa-0.40mpa
Water flow: 60L/h
Outlet faucet: 1/4 "
Product size: 485×160×385 (mm)
Product Description：
【 Precision filtration 】Micron level filtration, remove bacteria, sediment, rust, green algae, colloid and other substances in tap water;
【 Mineralized water 】Retention of mineral ions in water;
【 Large flow】1L/min large flow, no waiting for water;
【 Energy saving and environmental protection】No waste water, no electricity consumption, hydrodynamic operation, energy saving and environmental protection
product quality assurance：
1. No water leakage
Product design: The design of one-piece integrated water circuit and composite filter element greatly reduces the risk of water leakage and makes water safe and worry-free;
Test requirements: air inspection and water inspection double-station inspection to ensure that the whole machine is assembled without water leakage
2. No leakage
The products are certified by the national CCC agency. During the production process, each product has undergone a safety test to ensure that there is no leakage.
3. Good filtering effect
Filter element design: The structure of PP cotton is loose on the outside and tight on the inside, which can meet the larger dirt holding capacity, ensure the filtration accuracy and prolong the life of the filter element.
Material requirements: Authentic coconut shell activated carbon, with less carbon powder after pickling, the iodine value adsorption capacity is as high as 800 or more, ensuring the sweet taste of the water.
The reverse osmosis membrane made of imported membranes has a desalination rate of up to 98%, ensuring the purity of the water.
Effluent water quality: a special water quality room is set up and a taster is invited to evaluate the taste; each batch of filter elements is sampled at 10% to ensure the filter accuracy and the stability of the desalination rate of the filter elements
4. Stable performance
All water purification accessories are selected from the top three suppliers in the industry, and the performance of the accessories is tested at a ratio of 10% before storage to ensure the stability of the accessories.
Accessories test: 1. Pressure test: such as filter bottle, structure, PE pipe, etc., conduct 100,000 water hammer, static pressure and blasting tests in strict accordance with the national standard GB/T 30307-2013.
Electrical component test. Such as electronic control board, power supply, etc., in accordance with the requirements of GB/T 4720/GB5938, comprehensive testing of electrical strength, thermal shock, aging performance, etc.
Whole machine test: Sampling according to the proportion of 5%, and comprehensively test the product pressure holding, filtration and electric control.
content is empty!