Publish Time: 2021-10-25 Origin: Site
The heat pump hot water system inputs a small amount of high-grade energy (such as electric energy) to realize the transfer of heat energy from low temperature to high temperature. Throughout the year, the heat pump hot water system continuously removes the heat from the air, groundwater, and surface water, and heats the tap water to a certain temperature, and supplies it to users as domestic hot water.
Here is the content list:
How to choose the installation location of a hot water heat pump?
What are the design requirements of the hot water heat pump system?
How to maintain the hot water heat pump?
1. The installation location of heat pump hot water must have enough space.
2. The installation location of heat pump hot water should be as far away as possible from living and working areas.
3. When the unit of heat pump hot water is installed outdoors, wind and rain prevention facilities must be prepared.
4. Pay attention to the wind direction when installing the unit.
5. The installation position of the unit should be convenient for drainage.
1. The installation of the heat pump hot water should be leveled and fixed on the high-rise or ground foundation of the building. The foundation load should meet the requirements, and the foundation height should not be less than 100mm.
2. The unit of heat pump hot water is fixed with anchor bolts, and vibration reduction measures must be taken during installation.
3. The piping material of the water system on the user side can be selected: galvanized welded steel pipe, seamless pipe, copper pipe, stainless steel pipe, aluminum-plastic pipe, PP-R pipe.
4. In order to prevent the spread of vibration, the water pipe connecting the unit should be equipped with a rubber soft joint, and a soft wire protection tube should be used.
5. The water system pipeline should use high-quality insulation materials, and the insulation thickness depends on the local environment and the insulation performance of the insulation materials.
6. The installation of equipment, pipelines, valves, and meters should comply with relevant installation specifications and be easy to overhaul; pipe supports should meet the requirements of corresponding material and model strength.
7. The domestic water used on the user side of the heat pump hot water unit must comply with the "Sanitary Standards for Drinking Water", and it is strictly forbidden to directly use untreated water sources such as groundwater, river water, and lake water; water sources that do not meet the requirements must be installed with water treatment facilities.
8. In order to prevent impurities from entering the unit and causing a blockage, the water inlet pipe of the unit must be installed with a filter to facilitate cleaning.
1. Make frequent patrols and regularly check the water system pipelines and valves for water leakage; Check whether the water system instruments are in good condition and work properly; Check whether the heat pump hot water are falling off or loose.
2. Always check and clean the air system blockage caused by the accumulation of dust, leaves, or other dirt on the fins. The fins are cleaned according to the situation. The cleaning method is: gently wipe with a rag or soft brush, and wash with clean water.
3. The maintenance of the electrical system should be carried out by a professional electrician. Check whether the electrical box of the electrical box is normal, whether the wiring is firm and reliable, and ensure that there is no looseness; regularly clean the dust in the electrical box. If the machine is running, if there is a failure, it must be shut down for inspection and continue to work after the failure is eliminated.
It is the responsibility of each manufacturer to produce an industrial hot water heat pump that meets the standards, so as to ensure the safety of the use of hot water heat pump and the healthy development of the heat pump hot water market. MICOE many tests on hot water heat pumps before they leave the factory, and the quality qualification rate is guaranteed. If you are in the heat pump business, you can consider our cost-effective products.