Home > News > Solar Technology > How to Make a Solar Heater for Inground Pools Solar Technology

How to Make a Solar Heater for Inground Pools

DATE : 2014 01,17    Source :    Browse : 

You can choose an easy to make a solar heat collector for an in-ground pool to let the need for grid-powered heating things reduce, which not cheap. The typical house owner can create a panel from typical common components in about two several hours. You should know what solar water heater is and know solar water heater collector well at first.

1 Saw the plywood into a rectangle, 3 ft. by 4 ft.

2 Attach 4 pieces of 2-by-4 along the edges of the plywood, measured and reduce to match, and screwed in from the backside. The outcome will be a shallow box 4 inches deep.

3 Drill a hole in 1 of the 3-foot-lengthy 2-by-4s, close to the corner of the box, producing a hole big sufficient for the pipe to match via. Drill a next hole close to the opposite, diagonal corner, in the other 3-foot-lengthy 2-by-4.

4 Operate the pipe via the primary hole and throughout to the opposite 2-by-4 wall. Attach a 90-level pipe adapter, then a brief part of pipe, then an additional 90-level adapter. This will turn the pipe 180 levels.

5 Operate an additional part of pipe from the available finish of the adapter to the opposite wall and repeat the adapter-bend method. Carry on running pipe via the photo voltaic water panel, till a radiator is shaped. Exit the pipe via the next hole by precisely measuring the final bend to establish the path.

6 Paint the whole inside of the photo voltaic water panel, which include the pipes, with the dark paint and enable it to dry out. Utilize a number of coats if essential.

7 You should know that safe the Plexiglas to the best of the box with adhesive or pre-drilled screw holes. The sides can be sealed with duct tape.

8 Attach one end of the pipe on the photo voltaic water panel to the swimming pool pump or filter pumping gear with adapters and parts of PVC pipe. The other end of the pipe on the photo voltaic water panel can be routed with a garden hose to the shallow finish of the swimming pool. The hot-selling solar geyser is pumped from the swimming pools chilly place, the deep deposited in the shallow finish, to be circulated via the photo voltaic water panel and warmed.

Related Products:

Related News
product list
MICOE Events
Industry News
Solar Technology